“Ceramkoat” (Pressure-bearable) Systems
♦ Pressure-bearable Systems suited for Non-Potable Water
♦ Reaches temperatures of 55° – 65°C
The CCP Series (with “Ceramkoat” inner tank) is specially developed for use with NON-POTABLE water. It is a closed-circuit solar water heater that uses standard Flat-Plate panel technology. This unit can be installed on most roof/slabs and is a reliable product that has been designed to minimize the effects of Hard Water and water with High Iron content.
Standard Flat-Plate panels use copper risers with machine-welded aluminum fin technology to ensure high efficiency and long-term durability. Supported by the Sacrificial Anode and periodic flushing the effective life of the system is prolonged even beyond standard operational expectations.
See System Features
System
• Suitable for Hard-water/High Iron content
• Suitable for areas with good sunshine
• Operating Pressure: 0 ~ 0.6Mpa (6bar)
• Can be used with a pressure booster pump
• Winner of Presidential Award in Energy
• Delivery pressure equals input pressure (no friction loss)
• Easy-to-do regular maintenance is required
• Stainless Steel anchoring brackets for roof/slab
Hot water Storage Tank
• Ceramic-Coated Mild-Steel (3mm)
• Long-lasting aluminum outer body
• Electrical Backup (3kw / 1.5kw)
• Machine-injected high-density Polyurethane foam insulation (50mm)
• UV stabilized fiberglass side covers
• Sacrificial Anode – User replaceable
Solar Collector
• Copper risers for best heat transfer
• Machine-welded blackened Aluminum fins
• Panel Housing – Aluminum Frame with GI back
• Collector glass (3mm)
• High-quality glassfiber Insulation (25mm)
• Slim Panel design – only 65mm thick
Safety Components
• Anti-Vacuum protection assembly
• Electrical thermostat controller (42° ~ 55°C)
• Sacrificial Anode
• Auto Air Relief valve
• Non-Return valve at the cold water inlet
• Auto Pressure/Temperature relief valve
• Sediment removal (flushing) valve
Optional components (to purchase separately)
• Auto control valve for delivery temperature
• Remote electronic controller (temperature/ pressure) with display
• Premium Flat-plate Panel (Black-chrome plated with 5mm tempered-glass)
10 YEAR WARRANTY
This product is covered for all manufacturing defects for installation and use within standard parameters for potable water.
1 Year warranty on the Heating Element provided.
5 YEAR WARRANTY
Specially covered for installation and use for non-potable water (Hard water areas).
(Heating Element provided is not covered for use in bad (Non-potable) water conditions.)
SUNBIRD reserves the right to make any amendments or additions to the information herein, in keeping with our policy on continued product research and development